The BOILERWATCH® MMP-II-SSX acoustic pyrometer is an advanced industrial instrument that provides fully automatic measurement of high combustion-gas temperatures, permitting fuel trimming control within heaters, boilers and HRSG. The system is completely non- intrusive, and operates on the principal that the speed of sound in a gas is proportional to the temperature of that gas. Acoustic transceivers are mounted on the outside of walls of the heater/boiler/HRSG, and a high intensity acoustic signal is launched through the gas stream. Since the distance between the sound source and receiver is known and fixed, the average temperature of the gas along the acoustic path is computed from an accurate measurement of the sound signal's transit time. BOILERWATCH® MMP-II SSX Provides temperature measurement in groups of 5 paths. Increases speed of processing 80%. Also reduces air consumption 80%.

BOILERWATCH® MMP-II-SSX systems are available in a variety of configurations. With up to 24 individual path temperatures available, systems may be configured for spatial 2 dimensional temperature mapping, independent temperature measurements, or a combination of both. BOILERWATCH® MMP-II-SSX systems are easy to install, commission, and operate. With our Acoustic Pyrometer you can measure the gas temperature in any kind of furnace/boiler/HRSG and get a distribution map temperature, all in real time. The waveguide can be located in 2, 3 or 4 wall of the furnace/boiler/HRSG. Using real-time gas temperature and spatial temperature distribution profile maps from a BOILERWATCH® MMP-II-SSX Acoustic Pyrometer System to reduce out-of balance gas temperature conditions within the horizontal and vertical furnace exit plane of a furnace/ boiler/HRSG, provides a number of highly cost effective benefits.

It has been shown that excess O2 can be reduced by at least 0.5%, which results in a vastly significant increase in fuel efficiency and heat rate. The cost savings from this benefit alone pays for a BOILERWATCH® MMP-II-SSX system in very short time. By reducing temperature imbalances and eliminating hot-spots in the FEGT plane, NOx production is cut down at the source. More uniform temperature distribution also reduces thermal stress and increases the service life of critical pressure parts including wall tubes, superheaters and reheaters.

Power & Industrial

Access Door
- P&I Boiler Access Door
- Ductwork and Windbox Access Doors
- Duct / SCR / Precipitator Baghouse / Penthouse Access Doors
- Access Doors for Penthouse & Roof Applications
- Observation Ports
- Boiler Inspection Doors
- Tube Fabrication Services
Pendent Tube Alignments
Fast Access Boiler Platforms

Zeeco
Click For More Information

Boiler Access Doors

BHI-FW

Pulverized Coal Boilers
- Supercritical Steam Generators
- Subcritical Steam Generators
Utility Scale Heat Recovery Steam Generators (HRSGs)
Boiler Upgrades
Performance Upgrades and Optimization
Parts
- Pressure Parts
- Drums
- Valves
- Deareators

Boiler and Ash Systems & Components

HRSG Duct Burners

SVI Industrial
Click For More Information

Rentech boilers

HRSG Boilers
Waste Heat Boilers
Fired Package Watertube Boilers
Specialty Boilers
Service and repair of boilers, economizers, superheaters
24-hour emergency service
Field assembly
Turnkey installations
Performance upgrades
Burner retrofits
NOx and other emissions reductions
Power piping
Tube bending
Startups
Parts

Boilerwatch Brochure
Click For More Information

ABOUT BHI FW CORPORATION

BHI FW Corporation was formed in December of 2017 when BHI Co., Ltd of South Korea purchased the pulverized coal fired steam generator business from Amec Foster Wheeler, PLC. BHI FW is based in Hampton, NJ. The staff of BHI FW comprises the Engineering and Business Managers and key engineering staff from the Amec Foster Wheeler PC steam generator business. This team performed the detailed design of all major PC steam generator projects.

BHI FW Corporation was formed in December of 2017 when BHI Co., Ltd of South Korea purchased the pulverized coal fired steam generator business from Amec Foster Wheeler, PLC. BHI FW is based in Hampton, NJ. The staff of BHI FW comprises the Engineering and Business Managers and key engineering staff from the Amec Foster Wheeler PC steam generator business. This team performed the detailed design of all major PC steam generator projects.

Why partner with us for industrial valve maintenance and repair?

30+ years of valve repair experience.
- Utility
- Pulp and paper
- Chemical
Full-service turnkey valve repair
Experienced and factory trained valve repair technicians.
In-house and field specialty machining.
In-house and field welding and fabrication.
Ability to reverse engineer valve components to OEM standards.
We always put safety first in our facility and on your site
EMR of 0.89
No lost time accidents in over 1,800 days.
ASME VR, R, S and U certified
Independent repair facility

AM Manufacturing
Click For More Information

Boiler Round Burners

Scanners & Igniters

Zeeco

Burners
- HRSG Duct Burners
- Process
- Gas Boiler
- Package
- Pilots
- Burner Management
- HVW High-Intensity
Scanners & Monitors
- Flame Scanners
- Flare Monitoring Systems
- Ignitor Systems

Olympic Wear
Click For More Information

Scientific Environmental Instruments

Boilerwatch Acoustic Pyrometer & Tube Leak Detection System

ABOUT Foster Wheeler (Amec Foster Wheeler)

Foster Wheeler has a rich history dating back to 1891 with the Wheeler Condenser and Engineering Company located in Carteret, New Jersey, USA.

In the 1900’s, Foster Wheeler had several successful business lines including fired heaters, refinery distilling towers, steam condensers and superheaters and economizers for steam generators. During the 1950’s, Foster Wheeler developed its membrane wall panel construction and acquired the MB pulverizer technology which later evolved into the current MBF pulverizer. Foster Wheeler sold its first subcritical once through steam generator in 1964 to the Morgan Creek Station. The unit capacities increased in the United States eclipsing 1000 MW in capacity for a single Unit. In 1993, Foster Wheeler commissioned the first coal fired SCR systems in the United States. After 2000, Foster Wheeler recognized that having strategic license partners in key markets would promote the use of Foster Wheeler technology.

AM Manufacturing

Truck/Rail Car Load Out Systems:
- Fly Ash Conveyors
- Fly Ash Load Out
- Gypsum Load Out
- Limestone Stack Out

Zeeco offers a comprehensive portfolio of package burners, conventional burners, duct burners, and low-NOx and ultra-low NOx process and power/steam boiler burners that are world renowned for energy efficiency and low-emissions performance.

From modular units for commercial applications to fully engineered systems for complex burner configurations, Zeeco employs its own advanced combustion technologies to deliver superior results and extra-long life.

But we don't stop there. Our modeling lab is one of the finest in the world for both physical and CFD modeling to ensure your burners operate to their intended specifications. As a full-line supplier, Zeeco also designs its own burner management systems, flame scanners, ignition systems, and packaged fuel skids.

Whatever your burner requirements, Zeeco's global capabilities ensure that even the most challenging projects are completed on time and budget to offer the highest customer satisfaction rate in the industry.